+
  • NR6610E.png
  • NR6610Y直流电阻测试仪2.jpg

NR6600 Series DC Resistance Tester

Used for rapid measurement of DC resistance of inductive devices such as transformer windings, motor windings, reactor windings, arc suppression coils, and PTs. It is a replacement for DC single/double arm bridges. It can be used to check the welding quality of winding connections, short circuits, damage, lead errors, and the status of tap switches. It is used for handover tests, preventive tests, overhaul tests, and tap switch change tests.


Messages

Product patent

Product description

Product Introduction
  Used for rapid measurement of DC resistance of inductive equipment such as transformer windings, motor windings, reactor windings, arc suppression coils, and PTs. It is a replacement for DC single/double arm bridges. It can be used to check the welding quality, short circuits, damage, lead errors, and tap switch status of windings. It is a test equipment for handover tests, preventive tests, overhaul tests, and tap switch change tests.
 
Main Features
  ◆ Can quickly establish the test current, the test speed is hundreds of times faster than the bridge, and the test repeatability is good;
  ◆ Built-in fast discharge circuit, discharging takes only a few seconds, and can dynamically indicate the discharge status, thus effectively ensuring personal and instrument safety;
  ◆ Even in environments with severe interference, the last digit can still remain stable.
 
Technical Parameters
Instrument Parameters
NR6602
NR6605
NR6610
NR6620
NR6640
NR6650
Output Current
2A
2mA, 20mA,
200mA, 2A, 5A
1mA, 10mA, 100mA,
1A, 5A, 10A
2.5A, 5A,
10A, 20A
2.5A, 5A, 10A,
20A, 40A
2.5A, 5A, 10A,
20A, 50A
Measurement Range
1μΩ~2kΩ
1mΩ~2kΩ
200μΩ~20kΩ
0Ω~100Ω
1μΩ~20Ω
40μΩ~4Ω
Measurement Accuracy
0.2%
0.2%
0.2%
0.2%
0.2%
0.2%

 

SAUNDERS

If you have any suggestions or feedback on our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.


Submit