+
  • NR1300盐密测试仪2.jpg

NR1300 series salt fog tester

The NR1300 series salt density tester is a special measuring instrument designed for anti-flashover detection in power systems, used to measure the equivalent salt density (hereinafter referred to as "salt density") of insulators and the conductivity of solutions. This instrument conforms to the provisions and requirements of the "Standard for Grading of Environmental Pollution and Selection of External Insulation of High-Voltage Overhead Lines and Power Plants and Substations".


Messages

Product patent

Product description

Product Introduction
  The NR1300 series salt density tester is a special measuring instrument for measuring the equivalent salt density (hereinafter referred to as "salt density") of insulators and the conductivity of solutions, developed for anti-fouling detection of power systems. This instrument conforms to the provisions and requirements of the "Standard for Grading of Environmental Fouling and Selection of External Insulation of High-Voltage Overhead Lines and Power Plants and Substations".
 
Main Features
  This instrument uses a single-chip microcomputer as its core, eliminating the knobs and measurement section selection switches of general instruments, realizing fully automated measurement and LCD display. In addition to measuring salt density, it can also measure the conductivity and temperature of the solution. The whole machine is widely used in power, teaching, scientific research and other related industries due to its high measurement accuracy, intuitive reading, convenient and flexible use.
Used in power, teaching, research and other related industries.
 
Technical Parameters
  ◆ Measurement Range
  Salt Density: 0.01mg/cm2 ~ 0.5mg/cm2 (based on X-4.5 type insulator)
  Temperature: 0℃ ~ 40℃
  Conductivity: 50 ~ 100000us/cm2
 
  ◆ Measurement Accuracy
  Salt Density: Resolution 0.001, full-scale accuracy ≤ ±2%
  Temperature: Resolution 0.1, accuracy ≤ ±0.5℃
  Conductivity: Resolution 0.01, full-scale accuracy ≤ ±2%
 
  ◆ Operating Conditions
  Ambient Temperature: 0℃ ~ 40℃
  Power Supply: AC: 220V ±10% 50HZ
 

SAUNDERS

If you have any suggestions or feedback on our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.


Submit