Recently, Wuhan Jindian Technology technical engineers came to Xinjiang to provide debugging training services for the NR4100 cable fault tester and NR4250 underground pipeline tester purchased by customers.

    The NR4100 cable fault tester and NR4250 underground pipeline tester produced by our company are mainly used for cable fault finding.

    NR4100 cable fault tester

    This product is a comprehensive set of cable fault detection instruments. Can be the cable high resistance flashover fault, high and low resistance grounding, short circuit and cable disconnection, poor contact and other faults test, if equipped with sound measurement legal point instrument, can accurately determine the precise location of the fault point, especially suitable for testing various models, different levels of voltage power cables and communication cables.

    NR4250 Underground Pipeline Tester

    This product uses the principle of electromagnetic induction to detect the precise direction and depth of underground cables and locate the open circuit, short circuit and outer skin fault points of cables.

    The working principle is: electromagnetic signal is generated by the transmitter, the signal is transmitted to the underground cable under test through different transmission connection methods, after the underground cable senses the electromagnetic signal, the induced current is generated on the cable, the induced current propagates along the cable to the distance, and during the propagation of the current, electromagnetic waves are radiated to the ground through the underground cable, so that when the underground pipeline tester receiver detects on the ground, it will receive an electromagnetic wave signal on the ground above the cable. The location, direction and fault of underground cables are determined by the change in the strength of the received signal.

    After arriving at the project site, the technical engineer learned more about the site situation from the customer, and immediately began to test with the test instruments produced by our company, followed the customer along the cable laying site one by one, and finally successfully helped the customer find the fault point.

    After four days of training, the technical engineers conducted comprehensive training on the two types of equipment purchased this time and the equipment purchased before. The customer basically mastered the use of the equipment, praised the quality of our equipment, and expressed high recognition of the professional ability of our technical personnel.

    To provide our customers with a perfect service experience has always been our service tenet, every time a piece of equipment sold, our company will regularly visit to understand the use of equipment, help customers solve equipment problems. Choose Jindian Technology, let you buy with confidence, use comfortably!